If you have a Stern Seat
To obtain the Snap Layout, remove the stern backrest off your boat.
While standing in the boat, measure on the boat, center to center of snap for an accurate measurement. Or, you can cut off the original snap strip section from your backrest, send it to us to use for a template
Your boat will only either 7 or 9 snaps
If you Never had a Stern Seat
We will still Need the Above. You can choose the 7 or 9 Snap Layout.
Measure inside your boat the width you would like the Back & Bottom to be.
You can Copy & Paste these templates for your order